MilSim Empire
http://milsimempire.com/

ION Magfeed Project
http://milsimempire.com/viewtopic.php?f=82&t=4806
Page 1 of 3

Author:  Spydercam [ Sun Mar 17, 2013 2:48 pm ]
Post subject:  ION Magfeed Project

Hi,
i´m working at the moment on my ION which i like to build to a magfeeded marker.
The style of making is like my M98M4 Mod. but i use the sheetmetal with holes now and Fiberglas still. Most pieces are allready made but i have to install piece by piece to fit an other one it will take some more time !!!

On the pic i show it, how it will gonna look like when all is done !!!

Attachments:
ION Magfeed.JPG
ION Magfeed.JPG [ 55.18 KiB | Viewed 12444 times ]

Author:  Spydercam [ Mon Mar 18, 2013 3:58 pm ]
Post subject:  Re: ION Magfeed Project

Today i started installing the MagRelease mechanism first i want to build a single piece of the mechnanism but now i make it all in one cause it is more accurate and less pieces !!!

Here some pics of:

Attachment:
MSE1.JPG
MSE1.JPG [ 105.49 KiB | Viewed 12428 times ]


Attachment:
MSE2.JPG
MSE2.JPG [ 109.99 KiB | Viewed 12428 times ]


Attachment:
MSE3.JPG
MSE3.JPG [ 106.41 KiB | Viewed 12428 times ]


Attachment:
MSE4.JPG
MSE4.JPG [ 64.94 KiB | Viewed 12428 times ]

Author:  Mile Zero [ Thu Mar 21, 2013 8:56 pm ]
Post subject:  Re: ION Magfeed Project

Should be cool when its done. Fiberglass is very strong

Author:  Slick [ Fri Mar 22, 2013 6:24 am ]
Post subject:  Re: ION Magfeed Project

Nice work! I don't think I have ever seen a mag fed ion yet. Should be interesting n

Author:  Spydercam [ Fri Mar 22, 2013 10:29 am ]
Post subject:  Re: ION Magfeed Project

Yes it´s strong but i dont like working with fiberglas !!! :wink:

Here some pics of how the release looks after changing some things !!!
Now it´s just for use on right side cause i installed a spring to push the button right back in position.
Yeaahhh looks ... but it´s strong which is most important i think !!!

On the last pic is an idea of how i set the internals !!! (I will think about it but it´s not the final plan)

Attachment:
ion r1.JPG
ion r1.JPG [ 73.7 KiB | Viewed 12392 times ]

Attachment:
ion r2.JPG
ion r2.JPG [ 69.59 KiB | Viewed 12392 times ]

Attachment:
ion r3.JPG
ion r3.JPG [ 67.46 KiB | Viewed 12392 times ]

Attachment:
ion r4.JPG
ion r4.JPG [ 56.21 KiB | Viewed 12392 times ]

Author:  robomaniac [ Sun Mar 24, 2013 4:16 pm ]
Post subject:  Re: ION Magfeed Project

magfed ion - thats great!
mb you can try to use already done magwell from RAP4 Dmags (mkp kit)
and modify it a bit, to fit your construction, and sure dmags are cheap :D
http://www.rap4.com/store/paintball/mkp ... de-package

Author:  Spydercam [ Fri Mar 29, 2013 3:46 pm ]
Post subject:  Re: ION Magfeed Project

Haven´t seen that before this kit but i knew about the D-Mags !!! This would be a nice solution !!!

But not easy to get them in germany and i allready started with the DAM magfeed version !!!

:wink:

Author:  Spydercam [ Mon Apr 01, 2013 3:44 pm ]
Post subject:  Re: ION Magfeed Project

Little update pic:

Attachment:
MSE ION Gripframe.JPG
MSE ION Gripframe.JPG [ 81.58 KiB | Viewed 12336 times ]


Starting second section Triggerguard and Gripinstallpoint.

Author:  Slick [ Mon Apr 01, 2013 6:51 pm ]
Post subject:  Re: ION Magfeed Project

Looking good so far. Good idea on using the perforated aluminum. That's got to be some easy stuff to bend and shape. Can't wait to see the project when you start fiberglassing the frame.

Keep up the good work.

Author:  Spydercam [ Tue Apr 02, 2013 12:29 pm ]
Post subject:  Re: ION Magfeed Project

Jo i did a little bit work !!! (Third section: Stock, Reg. cover, connection between Section 2and3)

So you can see how it will be looking when it´s done (90%). I have to think about now what handguard is gonna use for and may cause i have to build a top cover still may with some gaspipe dumie AK like ?!?!?

Attachment:
mse1.JPG
mse1.JPG [ 56.31 KiB | Viewed 12324 times ]


Attachment:
mse2.JPG
mse2.JPG [ 63.93 KiB | Viewed 12324 times ]


Attachment:
mse3.JPG
mse3.JPG [ 84.21 KiB | Viewed 12324 times ]


Attachment:
mse4.JPG
mse4.JPG [ 65.82 KiB | Viewed 12324 times ]


:wink:

Author:  Spydercam [ Thu Apr 04, 2013 11:59 am ]
Post subject:  Re: ION Magfeed Project

Piece(4) the top cage will hold batterie, RedDot and closes the open top !!!

Not finished, i have to get some srews and stuff first to fit it right !!!

Attachment:
mseion4.JPG
mseion4.JPG [ 66.52 KiB | Viewed 12300 times ]


Attachment:
mseion3.JPG
mseion3.JPG [ 68.14 KiB | Viewed 12300 times ]


Attachment:
mseion2.JPG
mseion2.JPG [ 98.55 KiB | Viewed 12300 times ]


Attachment:
mseion1.JPG
mseion1.JPG [ 67.81 KiB | Viewed 12300 times ]

Author:  Spydercam [ Fri Apr 05, 2013 1:50 pm ]
Post subject:  Re: ION Magfeed Project

Fresh pics !!!

Attachment:
mseion9.JPG
mseion9.JPG [ 60.11 KiB | Viewed 12286 times ]


Attachment:
mseion8.JPG
mseion8.JPG [ 60.81 KiB | Viewed 12286 times ]


Attachment:
mseion7.JPG
mseion7.JPG [ 77.32 KiB | Viewed 12286 times ]


Attachment:
mseion6.JPG
mseion6.JPG [ 61.67 KiB | Viewed 12286 times ]


Attachment:
mseion5.JPG
mseion5.JPG [ 82.81 KiB | Viewed 12286 times ]


Soon i can start working with that ... fiberglas stuff !!! :(

Author:  robomaniac [ Sat Apr 06, 2013 2:08 am ]
Post subject:  Re: ION Magfeed Project

looks interesting. cant wait to see it in action :wink:

Author:  Spydercam [ Wed Apr 10, 2013 9:03 am ]
Post subject:  Re: ION Magfeed Project

I did a little bit, after searching in my electronic garbage i found in an old mouse with a nice switch !!!

I made a trigger and housing for it out of sheetmetal !!!

Attachment:
mset1.JPG
mset1.JPG [ 81.65 KiB | Viewed 12239 times ]


Attachment:
mset2.JPG
mset2.JPG [ 81.38 KiB | Viewed 12239 times ]


Attachment:
mset3.JPG
mset3.JPG [ 73.18 KiB | Viewed 12239 times ]


Attachment:
mset4.JPG
mset4.JPG [ 80.19 KiB | Viewed 12239 times ]


I´m close to finish the internals so i will go test soon i hope !!!

Author:  Spydercam [ Fri Apr 12, 2013 12:34 pm ]
Post subject:  Re: ION Magfeed Project

Sooo ... i got now all hoses, wires etc. and cleaned and greased everything !!!
I´m ready to test it, just need some pressure !!!

I go try make a vid of the first test !!! :wink:

Attachment:
mseft.JPG
mseft.JPG [ 80.85 KiB | Viewed 12219 times ]

Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/